Grandstream Networks UCM6102 Скачать руководство пользователя страница 261

Страница: 261 / 308

Firmware Version 1.0.9.26

UCM6100 Series IP PBX User Manual

Page 260 of 305

be required by some providers for authentication.

Auto Domain

If enabled, the UCM6100 will add local host name and local IP to domain

list. The default setting is "No".

Allow External Domains

If enabled, requests for external domains that are not served by the

UCM6100 will be allowed. The default setting is "Yes".

SIP SETTINGS/MISC

Table 86: SIP Settings/Misc

Outbound SIP Registrations

Configure the register retry timeout (in seconds). The default setting is 20.

Configure the number of registration attempts before the UCM6100 gives

up. The default setting is 0, which means the UCM6100 will keep trying

until the server side accepts the registration request.

Video

Max Bit Rate (kb/s)

Configure the maximum bit rate (in kb/s) for video calls. The default

setting is 384.

Support SIP Video

Select to enable video support in SIP calls. The default setting is "Yes".

Generate Manager Events

If enabled, the UCM6100 will generate manager events when SIP UA

performs events (e.g. Hold). The default setting is "No".

Reject Non-Matching INVITE

If enabled, when rejecting an incoming INVITE or REGISTER request, the

UCM6100 will always reject with "401 Unauthorized" instead of notifying

the requester whether there is a matching user or peer for the request.

This reduces the ability of an attacker to scan for valid SIP usernames.

The default setting is "No".

SIP SETTINGS/SESSION TIMER

Table 87: SIP Settings/Session Timer

Session Timers

Select the session timer mode. The default setting is "Accept".

The options are:



Originate

Always request and run session timer.



Run session timer only when requested by other UA.



Refuse

Do not run session timer.

Содержание UCM6102





















































































































































































































































































































Результаты поиска

Содержание UCM6102

Отзывы:

Бренды по названию

Популярные бренды

Grandstream Networks UCM6102, Руководство пользователя

Результаты поиска

Содержание UCM6102

Отзывы:

Бренды по названию

Популярные бренды