Grandstream Networks UCM6102, Руководство пользователя

Страница: 249 / 308

Firmware Version 1.0.9.26 UCM6100 Series IP PBX User Manual Page 248 of 305
Figure 144: Download Recording File from Recording Files Page
CALL PARK
The UCM6100 provides call park and call pickup features via feature code.
PARK A CALL
There are two feature codes that can be used to park the call.

Feature Maps->Call Park (Default code #72)
During an active call, press #72 and the call will be parked. Parking lot number (default range 701 to
720) will be announced after parking the call.

Feature Misc->Call Park (Default code 700)
During an active call, initiate blind transfer (default code #1) and then dial 700 to park the call. Parking
lot number (default range 701 to 720) will be announced after parking the call.
RETRIEVE THE PARKED CALL
To retrieve the parked call, simply dial the parking lot number and the call will be established. If a parked
call is not retrieved after the timeout, the original extension who parks the call will be called back.
ENABLE SPY
If “Enable Spy” option is enabled, feature codes for Listen Spy, Whisper Spy and Barge Spy are available
for users to dial from any extension to perform the corresponding actions.
Assume a call is on-going between extension A and extension B, user could dial the feature code from
extension C to listen on their call (*54 by default), whisper to one side (*55 by default), or barge into the call