Grandstream Networks UCM6102 Скачать руководство пользователя страница 155

Страница: 155 / 308

Firmware Version 1.0.9.26

UCM6100 Series IP PBX User Manual

Page 154 of 305



Click on "Create New SIP Trunk" or "Create New IAX Trunk" to add a new VoIP trunk.



Click on

to configure detailed parameters for the VoIP trunk.



Click on

to configure Direct Outward Dialing (DOD) for the SIP Trunk.



Click on

to start LDAP Sync.



Click on

to delete the VoIP trunk.

For VoIP trunk example, please refer to the document in the following link:

http://www.grandstream.com/products/ucm_series/ucm65xx/documents/how_to_interconnect_multiple_uc

m6510_using_peer_trunk.pdf

The VoIP trunk options are listed in the table below.

Table 50: Create New SIP Trunk

Type

Select the VoIP trunk type.



Peer SIP Trunk



Provider Name

Configure a unique label to identify this trunk when listed in outbound

rules, inbound rules and etc.

Host Name

Configure the IP address or URL for t

he VoIP provider’s server of the

trunk.

Keep Original CID

Keep the CID from the inbound call when dialing out. This setting will
override “Keep Trunk CID” option. Please make sure that the peer PBX at
the other side supports to match user entry using “username” field from

authentication line.

Keep Trunk CID

If enabled, the trunk CID will not be overridden by extension

’s CID when

the extension has CID configured. The default setting is

“No”.

NAT

Turn on this setting when the PBX is using public IP and communicating

with devices behind NAT. If there is one-way audio issue, usually it is

related to NAT configuration or SIP/RTP port support on the firewall.

Disable This Trunk

If checked, the trunk will be disabled.

Note:

If a current SIP trunk is disabled, UCM will send UNREGISTER message

(REGISTER message with expires=0) to the SIP provider.

TEL URI

If the trunk has an assigned PSTN telephone number, this field should be

Содержание UCM6102





















































































































































































































































































































Результаты поиска

Содержание UCM6102

Отзывы:

Похожие инструкции для UCM6102

Бренды по названию

Популярные бренды

Grandstream Networks UCM6102, Руководство пользователя

Результаты поиска

Содержание UCM6102

Отзывы:

Похожие инструкции для UCM6102

Бренды по названию

Популярные бренды