Grandstream Networks HT813 Скачать руководство пользователя страница 39

Страница: 39 / 79

P a g e

HT813 Administration Guide

Version 1.0.1.2

Download Device

Configuration

Allows user to download and save a text file containing all the P values of each

setting as configured at that point on the unit. For Security Reasons,

Passwords won’t be Downloaded.

Download Device XML

Configuration

Allows user to download and save an XML file containing all the P values of

each setting as configured at that point on the unit. For Security Reasons,

Passwords won’t be Downloaded.

Upload Firmware

Allows the user to upgrade the firmware with a single firmware file by browsing

and loading the file from your computer (local directory).

Upload Configuration

Allows to upload configuration file to the device.

Export Backup

Configuration

Download backup file to local computer.

The backup file is XML and encrypted.

Restore From Backup

Configuration

Upload backup file to the ATA to restore your saved configuration

FXS Port Page Definitions

Table 9: FXS Page

Account Active

Activates / Deactivates the accounts. The FXS port configuration will not change if

disabled, although the port will not be operational, in this state, there will be no dial tone

when picking up the analog phone and making/receiving calls will not be possible.

Primary SIP Server

Configures SIP server IP address or domain name provided by VoIP service provider.

This is the primary SIP server used to send/receive SIP messages from/to HT813.

Failover SIP Server

Specifies failover SIP server IP address or domain name provided by VoIP service

provider.

This server will be used if the primary SIP server becomes unavailable.

Prefer Primary SIP

Server

Selects to prefer primary SIP server. The account will register to primary Server if

registration with Failover server expires.

Default is

Outbound Proxy

Specifies IP address or domain name of outbound Proxy, or media gateway, or session

border controller. Used by HT813 for firewall or NAT penetration in different network

environments. If symmetric NAT is detected, STUN will not work and only outbound

proxy can correct the problem.

https://arttel.ru/

https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813

Содержание HT813
















































































Результаты поиска

Содержание HT813

Отзывы:

Похожие инструкции для HT813

Бренды по названию

Популярные бренды

Grandstream Networks HT813, Руководство администратора

Результаты поиска

Содержание HT813

Отзывы:

Похожие инструкции для HT813

Бренды по названию

Популярные бренды