P a g e
|
30
HT813 Administration Guide
Version 1.0.1.2
Unconditional Call
Forward to PSTN
VoIP calls will be forwarded to the specified PSTN number.
Specify PSTN number.
Unconditional Call
Forward to VoIP
Incoming PSTN calls will be forwarded to the VoIP number.
Specify “User ID”, “SIP Server” and “SIP Destination Port”
Advanced Settings Page Definitions
Table 8: Advanced Settings
Advanced Settings
New Admin Password
Defines the administrator level password to access the Advanced Web
Configuration page. This field is case sensitive. Only the administrator can
configure the “Advanced Settings” page. Password field is purposely left
blank for security reasons after clicking update and saved.
The maximum password length is 30 characters.
Confirm Admin Password
Re-enter the admin password to confirm change admin password on web
GUI to avoid typo or mistakes.
Layer 2 QoS
Sets values for:
802.1Q/VLAN Tag
. Default is
0
. Valid range is 0-4094.
SIP 802.1p
. Default is
0
. Valid range is 0-7.
RTP 802.1p
. Default is
0
. Valid range is 0-7.
Black List for WAN Side Port
It could be either port range or single port separated by a “,”
Example: “5000-6000, 7000 “.
STUN Server
Configures IP address or domain name of STUN server. Only non-symmetric
NAT routers work with STUN.
Keep-alive Interval
Sends periodically a blank UDP packet to SIP server in order to keep the
"ping hole" on the NAT router open. Default is
20
seconds.
