P a g e
|
15
HT813 Administration Guide
Version 1.0.1.2
1.
Insert a standard RJ11 telephone cable into FXS port and connect the other end of the
telephone cable to a standard touch-tone analog telephone.
2.
Connect a computer or switch to the LAN port of the HT813 using an Ethernet Cable.
3.
Insert the power adapter into the HT813 and connect it to a wall outlet and make sure to respect
the technical specifications of the power adapter used.
4.
Power, LAN and FXS LED will be solidly lit when the HT813 is ready for use.
Note
: Please make sure to enable NAT Router under Web GUI
Basic Settings
Device Mode.
Figure 3: Connecting the HT813
HT813 LEDs Pattern
There are four (4) LED types that help you manage the status of your HT813.
Internet ADSL/Cable
Modem Ethernet
Fax
Cordless
Analog Phone
WAN
LAN
FXS
FXO
PSTN
Cloud
