P a g e
|
46
GWN7000 User Manual
Version 1.0.6.28
ROUTING
Static Routes
GWN7000 supports setting manually static IPv4 and IPv6 routes as well as displaying routing table entries.
Static routes configuration page can be accessed from GWN7000 WebGUI
→
Router
→
Static Routes:
Three tabs are available:
-
Routes
to view routing table entries.
-
IPv4
to create, edit or delete static IPv4 static routes.
-
IPv6
to create, edit or delete static IPv6 static routes.
Following actions are available in both
IPv4
and
IPv6
tabs:
•
To add a new static route, click on
•
To edit a static route, click on
•
To delete a static route, click on
Refer to the following tables when editing or creating IPv4/IPv6 static routes:
Table 18: IPv4 Static Routes
Name
Enter the Name of the static route to be configured.
Enabled
Select whether to enable or disable this static route.
Interface
Choose the LAN network or WAN port, which will be using this static route.
Target Network/Host
Enter the Network/Host IP address on which to route the traffic to.
Example: 192.168.5.0
Netmask
Enter the Network/Host Netmask.
Example: 255.255.255.0
NextHop
Enter the NextHop IP address.
Example: 192.168.5.1.
Metric
Set the metric value. The valid range is 0-255. Default value is 0.
