Grandstream Networks GWN7000 Скачать руководство пользователя

Страница: 111 / 155

P a g e

111

GWN7000 User Manual

Version 1.0.6.28

Table 37: UPnP Settings

Enable Daemon

Check to enable Daemon for UPnP.

External Interface

Select the WAN interface to allow external connection to resources that

enables UPnP.

Internal Interface

Check the LAN network on which to activate UPnP.

Enable UPnP

Check to Enable UPnP for the LAN clients on selected LAN network.

Enable NAT-PMP

Check to enable automatic NAT Port Mapping (NAT-PMP).

Secure Mode

Check to activate secure mode for devices that activate UPnP.

Logging to Syslog

Choose whether to log activities for UPnP into Syslog.

Download Speed

Set the Download speed value in KB/s. Default is 2048

Upload Speed

Set the Upload speed value in KB/s. Default is 1024.

Users can check the UPnP status under the menu “

Firewall

→

Basic

→

UPnP

”.

Traffic Rules Settings

GWN7000 offers the possibility to fully control incoming/outgoing traffic for different protocols in customized
scheduled times and taking actions for specified rules such as Accept; Reject and Drop.

Following actions are available to configure Input, output and forward rules for configured protocols

•

To add new rule, Click on

•

To edit a rule, Click on

•

To delete a rule, Click on

Input

The GWN7000 allows to filter incoming traffic to networks group or port WAN1 or WAN2 and apply rules

such as:

•

Accept:

To allow the traffic to go through.

•

Reject:

A reply will be sent to the remote side stating that the packet is rejected.

•

Drop:

The packet will be dropped without any notice to the remote side.

Содержание GWN7000




























































































































































Результаты поиска

Содержание GWN7000

Отзывы:

Похожие инструкции для GWN7000

Бренды по названию

Популярные бренды

Grandstream Networks GWN7000, Руководство пользователя

Результаты поиска

Содержание GWN7000

Отзывы:

Похожие инструкции для GWN7000

Бренды по названию

Популярные бренды