GSC36XX Series User Manual
Version 1.0.1.3
P a g e
|
29
Table 7: Access Settings
Web Access Mode
Selects the access mode to the Web GUI either HTTP or HTTPS.
Web Access Port
Specifies the TCP port for Web Access, default 443.
MJPEG Authentication
Mode
Allows 3
rd
party system integrator or developers to implement related
application for users. By default, this feature is disabled and use more
secured “ChResponse” mode.
If enabled, user can send HTTP API with correct credentials to retrieve
MJPEG video stream or JPEG snapshot from GSC.
Notes:
1-
The MJPEG stream can be retrieved via the following URL
HTML based
➔
http(s)://admin:password@IP_GSC3610:Port/jpeg/mjpeg.html
Stream
➔
http(s)://admin:password@ip:port/jpeg/stream
2-
The MJPEG stream retrieved via the methods above is running on
the background and cannot be tuned. If users want more flexibility,
they can use the three configurable video streams as shown on
RTSP Port
Specifies RTSP port for media stream, default TCP port 554.
User Login Timeout(min)
If no action is made within this time the GSC361X will logout from the Web
GUI, range is between 3 and 60. Default is 5.
Maximum Number of
Login Attempts
Specifies the allowed login times error limit, if the unsuccessful login
attempts exceed this value, the GSC361X webGUI will be locked for the
time specified in Login Error Lock Time. Default is 5.
Locking Time of Login
Error (m)
Specifies how long the GSC361X is locked before a new login attempt is
allowed. Default is 5.
Disable Web Access
Allow or deny the web access to the GSC361X. (HTTP API do not take
effect when this option is enabled).
Note:
If both WebUI and SSH are disabled, GSC361X will get blocked
and not be able to be accessed. Only two ways to get it back:
1.
Re-provisioned by ITSP or Service Provider (by adjusting the related
parameters)
2.
Hard Reset (GSC361X has to be offline and uninstalled to perform
this hard reset).
Enable UPnP Discovery
UPnP (or mDNS) function for local discovery. Default setting is enabled.