Arlington Semi Privacy Fence
INSTALLATION INSTRUCTIONS:
Required Tools:
Level, Measuring tape, Hacksaw, PVC glue, Shovel
Installation Procedures:
1. Post Installation
Dig a hole of 300mm wide and 860mm deep. The distance from hole center to center is 2.44m. Put
post
into the hole,
then fill the hole with concrete. Adjust the post level so the top of the post is 1880 above the finished ground level. We
recommend you use well braced string lines to get the line of posts level, straight and even height.
2. Fence Installation
Insert bottom rail in to post (with alum insert) by pushing it all the way into one, then slide it back into the other post until
the barbs on the rail
snap into the holes. Put
panels
into the slot of
the bottom rail, making sure
panels with U-channel
are on both ends.
