1147-INS-LAB-RevD19
15
MEMORY FUNCTION
1. Press the USER button to select desired user number for recalling
memories.
2. Press the MEMORY button to recall the last reading stored in the
memory.
3. Press the MEMORY button repeatedly to recall the next set of
previous readings.
4. To delete the current displayed readings from memory, press and
hold the POWER button until the display shows “dEL”, then press the
POWER button again; the current displayed reading is deleted after
three beeps are heard.
Info: The number displayed in front of “dEL” indicates which user’s
memory set is selected for deletion.
5. To erase all readings in memory, press and hold the POWER button
under memory mode until the display shows “dEL” and press the
MEMORY button to show “dEL ALL” on the display, then press the
POWER button; all readings in memory are erased after three beeps
are heard.
6. Press the POWER button to exit memory function.
AVERAGE MODE
Info: To select a specific user to average, select the user number first by
pressing the USER button.
1. Press and hold the USER button for at least 3 seconds in STANDBY
status until “-L03” appears.
2. Press the USER button to switch between the average of the latest 3
readings (-L03), last 7 days (-d07), last 14 days (-d14), last 21 days
(-d21) and last 28 days (-d28).
3. Press the MEMORY button to switch between the morning, evening,
and all day average value. Press the USER button again to switch
between different period modes (last 3, morning, evening, or all day).
4. Press the POWER button to exit AVERAGE mode.
