LX_FR565G-INS-LAB-RevD21 9
UPHOLSTERY REMOVAL AND REPLACEMENT
Back Cushion
Refer to illustration at right.
To Remove:
Release the two rings mounted
on the elastic straps from the buttons
mounted on either side of the recliner frame
which hold the back cushion to the back
frame. Grip the top of the back cushion near
the back frame handgrips and slide up and off
the back frame.
To Replace:
Reverse the above procedure
and make sure to hook the strap rings to
the buttons mounted on either side of the
recliner frame to secure the back cushion.
Seat-Leg Cushion
Refer to illustration above.
To Remove:
Release the two rings mounted on the elastic straps from the buttons that hold the
seat-leg cushion to the recliner frame. Adjust the recliner into the semi-recline position. Flip the
seat section of the seat-leg cushion forward and release the two hooks that hold the seat-leg
cushion to the legrest frame. Slide the seat-leg cushion downward and forward and remove it from
the recliner frame.
To Replace:
Reverse the above procedure. Make sure to re-hook the seat section of the seat-leg
cushion to the recliner frame with the two hooks. Once the seat section is flipped down onto the
frame, be sure to hook the strap rings to the buttons mounted on either side of the recliner frame
to secure the seat-leg cushion.
Arm Panels
Refer to illustration at right.
To Remove:
Grip the steel rod at the bottom
of the side panel near the front of the side
frame. Gently slide the rod backward while
flexing the rod slightly until it disengages
from the hole in the frame that secures the
rod in place. Detach the four screws from
under the side frame arm plate.
To Replace:
Reverse procedure.
frame
key ring
strap
hook
Back Cushion Removal and Replacement
Seat-Leg Cushion Removal and Replacement
Arm Panel Removal and Replacement
