6200: UPHOLSTERED BLOOD-DRAW / PHLEBOTOMY CHAIR
WITH PADDED ARMS - ASSEMBLY AND OPERATION INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE USE
HE_6100-6200-INS-LAB-RevC22
1
WARNING: Important! Read and understand these instructions before assembling or using
the Blood-Draw / Phlebotomy Chair. If you do not understand any part of these warnings,
cautions or instructions, contact a healthcare professional for direction in the use of
this product. If the Blood-Draw / Phlebotomy Chair is not properly assembled and used,
personal injury and damage to the Blood-Draw / Phlebotomy Chair could result.
WARNING: If components are damaged or missing, contact your dealer immediately. DO NOT
use substitute parts. Use only Hausted replacement parts. Non-Hausted replacement parts
could cause personal injury and damage to the Blood-Draw / Phlebotomy Chair.
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate
(DEHP) which is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.p65warnings.ca.gov/furniture
.
WARNING: 6200 Chair maximum weight capacity is 800 lb (363 kg), EVENLY DISTRIBUTED.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury
caused by improper installation or use of this product.
INTENDED USE
The Blood-Draw / Phlebotomy Chair is intended as a medical-room chair where a patient can sit
comfortably to allow medical personnel to draw blood.
6200 Blood-Draw / Phlebotomy Chair
UNPACKING
Check for any obvious damage to the carton or contents (after unpacking). If damage is evident,
immediately notify the carrier and your Graham-Field authorized distributor.
Open the box and carefully remove the assembled frame and other components. Inside the box are:
1) One frame with seat and arm receivers attached and arms installed
2) One back
3) Four washers and four #10 x 2" Phillips flat head wood screws (to attach back to frame)
