READ ALL INSTRUCTIONS CAREFULLY
BEFORE STARTING INSTALLATION!
CAUTION!
■
Install in accordance with all applicable
regulations.
■
The GRX-CIR is a Class 2/PELV control; do
not connect line-voltage/mains cable to
Class 2/PELV terminals. Improper wiring can
result in personal injury or damage to the
control or to other equipment.
■
GRAFIK Eye Wallstations must be connected
to the GRAFIK Eye Control Unit by using
Class 2/PELV wiring methods per the
National Electrical Code. Check with your
local electrical inspector for the local code
requirements and wiring practices allowed in
your area.
Description
The GRX-CIR receives signals from the GRAFIK
Eye GRX-IT or GRX-8IT Handheld Wireless
Remote Control to activate scenes on the
GRAFIK Eye 3000 or 4000 Control Unit. It
requires an unobstructed line-of-sight for
receiving the signal (Remote Control pointed
directly at the GRX-CIR’s receiver). The GRX-
CIR offers 360˚ activation and a range of up to
50 feet (15 m).
Installation Instructions
Please Leave for Occupant
GRX-CIR Wallstation
Ceiling-mounted Infrared Receiver
Class 2/PELV
1
2
3
4
5
6
DIP Switches
Infrared
Lens
Programming
LED
030-616 9/10/99 8:37 AM Page 1
