Grady-White Boats Coastal Explorer 191, Руководство пользователя

Страница: 46 / 74

W
I N T E R I Z A T I O N A N D
S
T O R A G E
7–4
P
RIOR
T
O
L
AUNCHING
Start your own personalized list of items to check and perform prior to placing your boat in
the water. The following list will give you some ideas and suggestions:
• Check all gear and replace if necessary.
• Check thru hull fittings for cleanliness, damage, and tightness.
• Check prop installation and tightness.
• Clean battery terminal posts with a wire brush or bronze wool. Apply a light coating of grease
to posts to prevent corrosion.
• Check all wire connections for contact corrosion and tightness.
• Check hull seacock ball valves for easy operation and for condition of hose.
• Check operation of bilge pumps in manual and automatic modes.
• Check shower sump pump (if installed).
• Check operation of all electrical circuits.
• Check the hoses on the freshwater system, and close all valves, fill freshwater system and
check for leaks.
• Perform maintenance on engines according to the manufacturer’s manuals prior to returning
them to service.
• Check all engine and steering control cables and linkage for operation. Lubricate cables and
linkage as necessary.
• Check safety equipment including flares, fire extinguisher and first aid kits. Replace items as
necessary.
A
FTER
L
AUNCHING
• With the boat in the water, check all sources of possible leaks stem to stern.
• Thoroughly check the fuel system including lines, fittings, connections, valves, and filters for
leaks.
• Connect to shore power (if installed). Check all electrical equipment, lights, water heater, air
conditioning system, battery charger operation, etc.
• Check operation of toilet (reference manufacturer’s manual).
• Test run engines and generator (if installed) as directed in manufacturer’s manual.