background image

Technical Data 

18

3A2851A

Technical Data

Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  See 

Models

, page 2.

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . .  See 

Models

, page 2.

Maximum air working pressure  . . . . . . . . . . . . . . . . . . . .  See 

Models

, page 2.

Pump cycles per 3.8 liters (1 gal.) . . . . . . . . . . . . . . . . . .  See lower manual, supplied.
Fluid flow at 60 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  See lower manual, supplied.
Motor piston effective area . . . . . . . . . . . . . . . . . . . . . . . .  See motor manual, supplied.
Stroke length  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  See motor manual, supplied.
Lower effective area . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  See lower manual, supplied.
Maximum pump operating temperature . . . . . . . . . . . . . .  See lower manual, supplied.
Motor fitting sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  See motor manual, supplied.
Fluid inlet size  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1/4 in. npt(f)
Fluid outlet size  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1 in. npt(m)
Sound pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  NXT air motors: See manual 311238, supplied.
Sound power  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  NXT air motors: See manual 311238, supplied.
Wetted parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  See manual 311762.

Содержание Xtreme 24N976





















Отзывы: