Startup
28
313875J
Startup
1.
Perform all required maintenance tasks. See
2.
Check for leaks.
3.
Check hydraulic fluid levels.
4.
Check pump wet cup fluid levels.
5.
Check feed system fluid levels.
6.
Turn Main Power Switch to the ON position. The
splash screen will be displayed on the ADM until it is
finished loading.
7.
When the ADM is finished loading, press
to
enable the ADM. The System Status Indicator Light
next to
will illuminate green.
8.
Press
repeatedly to select a different operating
mode then press
to accept.
NOTE:
The Setup screens cannot be accessed when
Disabled mode is the active operating mode. Also, cer-
tain machine functions and setup changes are disabled
when Standby mode is selected.
Moving parts can pinch or amputate fingers. When
the pump is operating and when raising or lowering
the ram, keep fingers and hands away from the pump
intake, platen, and lip of the drum.
Содержание VPM 12
