Graco ThermoLazer, Операция

Страница: 14 / 40

Important Safety Information
14 3A1319K
Important Safety Information
Use equipment in accordance with state and local ordi-
nances with Storage, Handling and Transportation of
Liquid Petroleum Gases, ANSI/NFPA58 or CSA B149.1
If equipment has been in storage, check for insects and
insect nests on burners and Venturi tubes.
Use only vertical vapor-withdrawal LP gas cylinders
which have been designed, fabricated, tested and
marked in accordance with registration of the U.S.
Department of Transportation (DOT) or the Standard for
Cylinders, Spheres, and Tubes for the Transportation of
Dangerous Goods CAN/CSA-B337, The Transportable
Pressure Vessels Regulators 2001 (S1 2001/1426), The
Gas Cylinders (Pattern Approval) Regulations 1987 (SI
1987/116)(Pattern Approval Regulations) for EEC-type
cylinders (under European Directive 84/525/EEC,
84/526/EEC, and 84/527/EEC. Use only 20 lb to 30 lb
(9.07 kg to 13.6 kg) LP-Gas cylinders.
LP-Gas cylinder to be used only in vertical upright posi-
tion as noted on agency approved LP-Gas cylinder for
proper vapor withdrawal.
Check gas supply hose connection to LP-Gas cylinder.
Make sure fitting is free of debris before connecting to
tank. Make sure gas connection is screwed completely
on and is free of leaks.
NOTE: The LP gas tanked is equipped with a POL gas
fitting. If a different sized fitting is needed, see your local
LP gas equipment supplier.
If you do not follow these instructions exactly, a fire
or explosion may result causing property damage,
personal injury or death.
Keep gas supply hose away from hot surfaces and
flames.
Burner
Kettle Burner
Front Screed
Box Burners
Rear Screed Box Burners
ti16989b
(ThermoLazer 300
TC
/ProMelt)
ti22561a
Burner
Burner
ti22561b
Burner
Burner
FlexDie Burners
(ThermoLazer 200/200
TC
)
(All ThermoLazer units)
ti24935a
Venturi Opening
ti14411a
(All ThermoLazer units)