Air Cylinder and Solenoid Valve
22
310717E
Air Cylinder and Solenoid Valve
Use Cylinder Replacement Kit, 287323.
For 120 V sprayer use Solenoid Replacement Kit
287324.
Disassembly
First read and follow instructions in the Before perform-
ing any service on sprayer section, page 8.
Then remove hopper, front and back covers, page 8.
Remove hose extension and RotoFlex HD Pump
assembly from frame, page 10.
1.
Remove hose from quick
release fitting by using your
fingers on one hand to push
in on ring while at the same
time, using the other hand,
gently pull the hose out of
the fitting.
2.
Remove electric wire
terminal connections.
3.
Remove cotter key
located on the end of the cylin-
der pin, by using a pliers to
straighten the ends and pull it
out of the hole.
4.
Gently push cylinder forward,
relieving tension on pin. Pull
out pin.
5.
Lift cylinder up and pull it
back.
6.
Remove dampening
grommet.
7.
Using a 15/16 in.
wrench, loosen nut,
located inside sprayer
frame at the end of the
air cylinder.
8.
Using a 15/16 in. wrench,
loosen nut on the other
side of the sprayer frame.
9.
Pull cylinder out of
sprayer frame.
If replacing cylinder
only, remove solenoid
valve (see a and b
above) and reinstall on
new cylinder.
ti4406a
ti4416a
ti4453a
If replacing solenoid valve only, it can be done at
this time.
a Using an adjustable wrench, rotate entire
solenoid valve assembly counter clockwise from
cylinder.
b Replace solenoid valve and continue with step 4
of reassembly.
ti4409a
ti4518a
ti4415a
ti4414a
