Pump and Repair Kit Matrix
26
3A4238B
Pump and Repair Kit Matrix
SaniForce 1040 FDA-Compliant Sanitary Pumps
Your Model No. is marked on the pump’s serial plate.
The first three digits are always either FW1 or FW7,
designating 1040 FDA-compliant sanitary pumps with
aluminum air motor housing material and tested with
water. The third digit defines the connection style, while
the final three digits define the materials of construction
of the wetted section parts. For example, a 1040 FDA
pump with an aluminum air motor, flange manifold
connections, PTFE o-rings, stainless steel seats, PTFE
balls, and PTFE diaphragms is Model
FW1111.
To
order replacement parts, refer to the part lists on page
29.
Repair kits are numbered in the same manner. The first
three digits are always FK1. Parts included in the kit are
marked with an asterisk in the parts list, for example
(201*). For example, if your pump has stainless steel
seats, PTFE o-rings, PTFE balls, and PTFE
diaphragms, order Repair Kit
FK1111.
To repair the air valve, order
Kit 236273
for models with
aluminum center housing. See page 29. Parts included
in Kit 236273 are marked with
.
The digits in the matrix
do not
correspond to the
reference numbers in the parts drawings and parts lists.
SaniForce Diaphragm Pump
(Stainless Steel Fluid Sections)
Connec-
tions
Seats and O-rings
Balls
Diaphragms
FW
All 1040 FDA-Compliant sanitary
pumps with aluminum air motor,
performance tested with water.
1
Flange
1
316 SST with
PTFE o-rings
1
PTFE
1
PTFE
FK1
All Repair Kits for 1040
FDA-Compliant sanitary pumps.
7
DIN
2
316 SST with
EPDM o-rings
2
Santoprene®
2
Santoprene®
Flange or DIN
3
Polychloroprene
with SST core
3
PTFE
Overmolded
