Jog
Jog
Jog Mode
Mode
Mode
Jog mode has two purposes:
• To speed fluid heating during circulation
• To ease system flushing and priming
Jog
Jog
Jog Level
Level
Level
The jog level determines how quickly the system
will pass chemicals through the system. Jog
levels are between J1 and J20. Lower jog levels
will move fluid at lower speeds and pressures.
Higher jog levels move fluid at higher speeds
and pressures. Actual speed and pressure are
variable based on the chemicals used.
Jog
Jog
Jog the
the
the System
System
System
NOTE:
NOTE:
NOTE: If pneumatic
pneumatic
pneumatic transfer
transfer
transfer pumps
pumps
pumps are in use,
manually turn on air to the pumps. See your
pump manual,
If electric
electric
electric transfer
transfer
transfer pumps
pumps
pumps are in use, the pumps
automatically turn on when the motor is turned
on.
1. Tap the Pump
Pump
Pump Mode
Mode
Mode button
2. Select Jog
Jog
Jog mode from the drop down menu.
3. Tap
to set the jog level.
4. Tap
to start the motor.
5. Tap
to stop the motor.
Jog
Jog
Jog the
the
the Transfer
Transfer
Transfer Pumps
Pumps
Pumps Separately
Separately
Separately
Pneumatic
Pneumatic
Pneumatic Transfer
Transfer
Transfer Pumps:
Pumps:
Pumps: Manually turn
on/off air to the pumps one at a time. See your
pump manual,
.
Electric
Electric
Electric Transfer
Transfer
Transfer Pumps:
Pumps:
Pumps:
1. Ensure the motor power
is off.
2. Tap
to turn on the A-side transfer
pump. Tap
to set the jog
level.
3. Tap
to turn off the A-side transfer
pump.
4. Tap
to turn on the B-side transfer
pump. Tap
to set the jog
level .
5. Tap
to turn off the B-side transfer
pump.
Jog
Jog
Jog Limit
Limit
Limit Feature
Feature
Feature
This feature automatically shuts off the Reactor
motor after a specified number of jog cycles.
Tap the check box next to the
icon to
enable/disable this feature. When enabled, the
job cycle limit will display and decrement while
the motor is running in jog mode.
The jog cycle limit can be set on the
Pressure/Flow Setup Screen.
34
3A8500B
