Start Up
3A3582B
11
Start Up
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
1.
Turn ON/OFF switch to the
OFF
position.
2.
Engage the trigger lock. Always engage
the trigger lock when sprayer is stopped
to prevent the gun from being triggered
accidentally.
3.
Turn pressure control knob to lowest
setting.
4.
Put drain tube into a waste pail and lift
Prime/Spray valve to PRIME position
(drain) to relieve pressure.
5.
Hold the gun firmly to a pail. Point gun
into pail. Disengage the trigger lock and
trigger the gun to relieve pressure.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection or splashed
fluid, follow the
Pressure Relief
Procedure
whenever sprayer is stopped
and before sprayer is cleaned or checked,
and before equipment is serviced.
ti28250a
ti25198b
ti28249a
ti28251a
ti27466a
