Graco PR70e, Инструкция по эксплуатации

Страница: 63 / 70

Appendix B - LCM Run Screen Overview
334135B 63
Maintenance Mode Run Screen
Used for machine testing. The user will be able to
extend or retract the pump, or open and close the dis-
pense valve from this screen. Once the user has navi-
gated to function to be implemented, the user simply
needs to press the dispense request key to issue the
request.
Shot Amount or Stroke % Adjust Screen
If in shot mode, and the user has enabled this run
screen adjustment (via a setup screen option), the user
can adjust the shot amount by simply pressing the Up or
Down arrow keys, then pressing the accept user entry
softkey. The minimum percent required is 15 percent.
Run Screen while Dispensing
Additional information is provided during a dispense
operation, consisting of a progress bar representing the
current % complete of the dispense operation (shot
mode only), and the amount of time elapsed for a dis-
pense. During a dispense, the run screen programming
options are no longer available. Once the dispense is
completed, the screen will return to the main home run
screen.
Error Code Acknowledgement Screen
This screen will be generated if an error condition
becomes active. The screen will contain the code for
the condition, a graphic describing the condition, the
standard Graco alarm bell, and a soft key prompting the
user to acknowledge the condition. Once the condition
has been acknowledged by the user, the screen will
return to the main run screen. If the condition is still
present after acknowledgement, the code previously
presented to the user will be displayed on the bottom left
hand corner of the main run screen. Once the condition
is corrected, the code displayed will be removed.