Graco LineLazer V 200MMA, Операция - Ремонт - Запчасти

Страница: 13 / 98

Grounding Instructions
3A9099A Operation, Repair, Parts 13
Grounding Instructions
(Flammable Flushing and Cleaning Materials)
Position the striper so the wheels are on a true grounded
surface, not on pavement or in the back of a trailer or a
truck.
The striper is equipped with a grounding wire and
clamp. The clamp must be connected to a true earth
ground when flushing with flammable materials. See
Important Grounding Information , page 3.
A metal sign post can be used as a true earth ground.
Connect the grounding wire and clamp to a metal post.
A properly grounded electrical outlet can also be used
as a true earth ground. Use the provided adapter.
Fluid hoses: Use only electrically conductive hoses with
a maximum of 300 ft. (91 m) combined hose length to
ensure grounding continuity.
Spray gun: Grounded through connection to a properly
grounded fluid hose and pump.
Pails
Flammable materials: follow local codes and
regulations. Use only conductive metal pails, placed on
a grounded surface such as concrete.
Do not place pail on a non-conductive surface such as
paper or cardboard which interrupts grounding
continuity.
Always ground a metal pail: connect a ground wire to
the pail. Clamp one end to the pail and the other end to
a true earth ground such as a water pipe.
To maintain ground continuity when sprayer is
flushed or pressure is relieved: hold metal part of
spray gun firmly to the side of a grounded metal pail then
trigger the gun.
This equipment must be grounded to reduce the risk
of static sparking. A static spark can cause fumes to
ignite or explode causing serious injury. A good
ground provides an escape wire for the electric
current.
ti30065a
ti24584a