Graco HydroShield WABL00, Инструкция - Каталог запасных частей

Страница: 61 / 140

Setup Menus
Maintenance Maintenance Maintenance 4: 4: 4: Fluid Fluid Fluid Valve Valve Valve Resets Resets Resets and and and Test Test Test
View fluid valve actuation counts, reset those counts,
and test the valves.
Shuttle Shuttle
Shuttle Fluid
Fluid
Fluid In:
In:
In: The fluid valve near the system fluid
inlet.
Pump Pump
Pump Fluid
Fluid
Fluid In:
In:
In: The fluid valve near the fluid inlet on
the isolation fluid pump. (Not present in WABL00,
WABL01.)
Pump Pump Pump Pressure: Pressure: Pressure: The valve that supplies air pressure
to the isolation fluid pump.
Maintenance Maintenance Maintenance 5: 5: 5: Misc Misc Misc Valve Valve Valve Resets Resets Resets and and and Test Test Test
Use this screen to view system valve actuation
counts for the ground rod and gun flush box, reset
those counts, and test the solenoid valves.
Ground Ground Ground Rod: Rod: Rod: Activates (raises) the ground rod to
allow the system to build a charge. Use this option to
perform ground rod maintenance. See the steps in
Check and Lubricate the Ground Rod, page 69 .
Note
The ground rod activates (raises) only if the
pneumatic door switch is closed.
Unchecked box: The system is grounded.
Checked box: The system is ungrounded.
Gun Gun Gun Flush Flush Flush Box: Box: Box: Activates the gun trigger to the gun
flush box. Not applicable to automatic gun systems.
3A8493A 61