Service
8
3A5053B
6. Grease piston packings.
7. Grease top inch or two of piston rod that will go
through the cylinder throat packings.
8. Slide piston rod assembly into bottom of cylinder.
Replace o-ring (207) if desired.
9. Reassemble intake valve with new o-ring (227),
seat (212) and ball (214). Seat may be flipped over
and used on other side. Clean seat thoroughly.
10. Install intake valve on cylinder. If a wrench is used
torque to 60 ± 5 ft-lb (81 ± 7 N•m).
NOTICE
Do not slide piston assembly into top of cylinder as this
may damage piston packing.
ti31057a
ti31058a
215
214
212
213
227
ti23115c
ti31059a
