Graco E-Flo SP, Инструкция по установке и каталог запасных частей

Страница: 31 / 46

Kits and Accessories
3A6586D 31
Pump Stand Frame, 253692
1. Assemble the stand as shown in
Figure 25
.
2. Position the pump stand frame so all components of
the system are easily accessible when the driver
and pump are installed.
3. Refer to the
Pump Stand Mounting Hole Diagram
on page
34
and use the holes in the base of the
stand as a guide to drill holes for 1/2 in. (13 mm)
anchors.
4. Ensure the stand is level. If necessary, level the
base using metal shims. Secure the stand to the
floor using four 1/2 in. (13 mm) anchors that are
long enough to prevent the stand from tipping.
5. Use the screws and washers supplied with the
pump stand frame and refer to the
Electric Driver
Mounting Hole Pattern
on page
35
to mount the
driver to the stand once the stand is assembled and
secured.
Wall Mount Bracket, 255143
1. Position the wall mount bracket so all components of
the system are easily accessible and a sufficient
height above the floor. Refer to
Dimensions
on
page
33.
NOTE:
Be sure to select a solid position on a wall. Use
appropriate sized bolts to support the weight of the
pump and driver and any additional weight of the fluid
used in the pump. See
Technical Specifications
on
page
43
to find the weight of the model you are using.
F
IG
. 25: Pump Stand
Ref Part Description Qty
601 253679 BRACKET, mounted, painted
1
602 100679 SCREW, cap hex hd
6
603 100018 WASHER, lock, spring
6
604 100321 NUT
6
605 120486 CAP, plug
4
606 15H893 FRAME, brace
1
607 253691 FRAME, leg
2
609 100133 WASHER, lock
4
610 100101 SCREW, cap, hex hd
4
605
x4
602
x6
606
601
602
x6
603
x6
607
x2
609
x4
610
x4
F
IG
. 26: Wall Mount Bracket
Ref Part Description Qty
701 253679 BRACKET, mounted, painted
1
702 100133 WASHER, lock
4
703 100101 SCREW, cap, hex hd
4
703
x4
702
x4
701