Graco E-flo iQ 26B543, Инсталляционные компоненты

Страница: 45 / 80

Repair
3A8217A 45
Repair
Disconnect Pump from Platen
The Pump is mounted to the Platens by different mount
-
ing kits. See the Repair Kits on page 62.
55 Gallon Platen
1. Follow the Pressure Relief Procedure on page 36.
2. Turn off power to the ram:
a. If using a Single Ram Supply System, turn the
red Disconnect Switch (AZ) OFF.
b. If using a Tandem Ram Supply System, turn the
red Disconnect Switch (AZ) OFF on the Ram
Supply Unit that requires repair only.
3. Remove four hex screws (426), four clamps (427),
and washers (425).
4. Carefully pull Pump away to prevent damage to
Pump inlet and remove o-ring (428).
Connect Platen
55 Gallon Platen
1. Place o-ring (428) from mounting kit on the Platen
(AD). If attached to plate, place Displacement Pump
(AC) onto Platen (AD). See F
IG
. 35.
2. Secure Pump’s intake flange to plate with screws
(426), washers (425), and clamps (427) included in
mounting kit 255392.
Remove Wipers
See Remove and Reinstall Wipers on page 41.
Install Wipers
See Remove and Reinstall Wipers on page 41.
F
IG
. 35: 55 Gallon Mounting Kit
428
426
427