Screen
Screen
Screen Navigation
Navigation
Navigation and
and
and Editing
Editing
Editing
Refer to this section for instructions on navigating
screens, entering information, and making selections.
All
All
All Screens
Screens
Screens
• Use the up and down arrow keys
to move
between screens.
• Press the enter screen key
to enter a screen.
The first data field on the screen is highlighted.
• Use the arrow keys
to highlight the data
that you want to change.
• Press the enter key
to edit.
• Press the cancel key
to cancel.
• When all data is correct, press the exit screen
key
to exit the screen. Then use the up and
down arrow keys
to move to a new
screen, or the toggle icon
to move between
Setup screens and Run screens.
Menu
Menu
Menu Fields
Fields
Fields
• Use the up and down arrow keys
to
highlight the correct choice from the menu.
• Press the enter icon
to select.
Number
Number
Number Fields
Fields
Fields
• The first digit in the field is highlighted. Use the
up and down arrow keys
to change the
number.
• Press the right arrow key
to move to the next
digit.
• When all digits are correct, press the right arrow
key
again to accept.
Check
Check
Check Box
Box
Box Fields
Fields
Fields
A check box field is used to enable or disable features
in the software.
• Press the enter key
to toggle between a check
and an empty box.
• The feature is enabled if a check
is in the box.
Reset
Reset
Reset Field
Field
Field
The reset field is used for totalizers. Press the
totalizer reset key
to reset the field to zero.
Initial
Initial
Initial Setup
Setup
Setup
NOTE:
NOTE:
NOTE: Before creating the pump profiles in Setup
Screens 1 through 4, you must set up the system
parameters in Setup Screens 5 through 22, as
follows.
1.
Press the lock icon
to enter the Setup
screens. Setup Screen 1 appears.
2.
Scroll to Setup Screen 5.
3.
See
, and select the
lower used in your system.
4.
Continue setting the system parameters
on
through
5.
Scroll to Setup Screen 1. Establish
the profiles for each pump. See
through
.
8
3A2527H
