Graco Dyna-Star HP 77X202, Инструкция по эксплуатации

Страница: 5 / 26

Typical Installation: Injector System
3A3956D 5
Typical Installation: Injector System
Systems with Pressure Relief Valve in the Refilling Line
The installation shown is only a guide for selecting and installing system components. Contact your Graco distributor
for assistance in planning a system to suit your needs.
NOTE: The remote filling station pump stalls (dead-heads)
when the reservoir is full. If the pump does not stall (dead-head) there is a leak in the system.
Key:
A Lubricant outlet connection (marked with an “0”)
B Pump
C Ignition switch
C1 Fuse
D
High-pressure lubricant supply lines
E Injector banks
F Lubrication controller
G Fill port (not used with Auto-Fill Shut Off)
H Overflow port (not used with Auto-Fill Shut Off)
J Breather
K Reservoir
L Vent Valve
M Motor
N Fluid overflow container
P Pump - remote filling station
R Reservoir - remote filling station
S Auto-Fill Shut Off
T Low Level Sensor
U Pressure Relief
V Supply Hose
F
IG
. 1
E
D
C
F
B
H
J
K
L
A
M
N
P
R
S
T
U
V
C1
G