Graco 257100, Операция

Страница: 6 / 32

Grounding
6 3A0245A
Grounding
FCC Notice (FCC ID: JHICED1)
Model Number: DFS150
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference that may
be received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by
Graco, Inc. could void the user's authority to operate this
equipment.
IC Notice (IC: 4840ACED1)
This product meets the applicable Industry Canada
technical specifications/Le présent materiel est con-
forme aux specifications techniques applicables
d’Industrie Canada.
Pressure Relief Procedure
1. Turn flow control knob fully counterclockwise to OFF
position.
2. Place deflector in hopper or suitable container.
3. Turn prime valve handle to PRESSURE RELIEF
position.
4. Display will read “----” when all pressure is relieved.
If display does not reach 0, the hose or inline valve
are clogged and prime/tool fill/ recirculation valve is
plugged.
GROUNDING INSTRUCTIONS (North America)
This appliance is rated more than 15 A and is for use
on a circuit having a nominal rating of 120 V and is fac-
tory equipped with a specific electric cord and plug. No
adapter should be used with this appliance. If the appli-
ance must be reconnected for use on a different type of
electric circuit, the connection should be made by qual-
ified service personnel; and after the connection, the
appliance should comply with all local codes and ordi-
nances.
Consult a qualified electrician if there is any doubt as to
whether an outlet box is properly grounded.
GROUNDING INSTRUCTIONS (Europe)
The sprayer must be grounded. Grounding reduces the
risk of static and electric shock by providing an escape
wire for the electrical current due to static build up or in the
event of a short circuit.
The sprayer cord includes a grounding wire with an
appropriate grounding contact.
The plug must be plugged into an outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
Do NOT tamper with relief valve or devices that control
maximum flow control during normal operation. Bodily
injury and/or damaged to equipment can occur.
ti8793a
ti14876a
bar/psi
ti15614a