Parts
332198C
13
Parts
--- Not for sale.
Items are shipped loose.
8
NOTE: Apply thread sealant on all tapered thread fittings.
When installing a new ball valve (8), remove the acorn nuts and
handle from the ball valves (8). Keep the acorn nuts, discard the
handle.
Install and tighten ball valves (8) so that the studs are pointing
away from each other. The flats line up squarely with the flat of
the inlet manifold (1), and the pressure laser marking are on the
handle (2) side of the inlet manifold (1).
Orient lever (9) and adjust balls in valves (8) so they are closed
when lever is pulled back. Carefully install the lever onto the ball
valve (8) studs, making sure the stud flats line up with the slots
in the lever.
Install acorn nuts from ball valves (8) on top of the lever (9).
Torque to 40-50 in-lb (4.5-5.6 N•m).
Apply
red thread locking liquid to the threads of the handle (2).
Make sure that #6 JIC adapter (13) is on the right and #5 JIC
adapter (14) is on the left of the inlet manifold (1), when viewed
from the rear of the gun.
Squarely align outlet manifold (6) to inlet manifold (1).
Apply lithium grease.
Torque restrictors (18) to 40-50 in-lb (4.5-5.6 N•m).
Hand tighten mixer nut (7) onto outlet manifold (6).
3
4
5
6
7
8
9
10
11
12
8
12
10
13
14 8
9
1
2
3
7
4
5
4
6 9
18
16
11
10
7
12
5
ti20581b
4
3 6
27
28
Ref Part
Description
Qty
1
24R986 MANIFOLD, inlet
1
2
16U410 HANDLE, manual 2K gun
1
3
16F422 GRIP, handle, 390st
1
4
119984 FITTING, union, 1/8 npt x 5/16 tube
4
5
15G421 TUBE, 5/16 extension, assembly
2
6
24K994 MANIFOLD, outlet
1
7
512292 NUT, mixer
1
8
214037 VALVE, ball, 1/4, 5000 psi, with lever
2
9
217562 LEVER, valve
1
10
100721 PLUG, pipe
2
12
113093 CONNECTOR, pipe
2
13
117506 FITTING, swivel, 1/4 npt x #6 JIC
1
14
117595 FITTING, swivel, 1/4 npt x #5 JIC
1
15
512289 MIXER, 1/2-30 spray
10
16
111516 PACKING, o-ring
2
17
249036 PACKING, o-ring (not shown),
includes qty 6 of item 16
1
18
15E373 RESTRICTOR, 0.024 in.
2
19
15K652 CAP, night
1
27
563199 VALVE, check, 1/8 npt, rev, 5000
2
28
15E378 FILTER, screen, 40 mesh
2
29
118665 GREASE, Fusion
®
1
30
117661 VISE, drill pit pin
1
31
---
BIT, 0.024 in. cleanout drill
1
32
15E374 RESTRICTOR, 0.032 in.
1
Ref Part
Description
Qty
