Graco 24L097, Инструкция-перечень запасных частей, Страница: 45 / 90

Setup Screens
Setup Setup Setup Screen Screen Screen 3: 3: 3: Grand Grand Grand Totals Totals Totals
Use this screen to view the Grand Total volumes and
to set the Grand Total units.
Key Key Key
Enter the screen to set or change
preferences.
Press to activate a field for editing or
to accept the highlighted selection on a
menu.
Move to the right when editing number
fields. Press again to accept the entry
when all digits are correct.
Grand Total for Spray Material
Grand Total for Flush Material
Volume Units – Select from the following
options:
– Select if system has no
flow meter
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
Setup Setup Setup Screen Screen Screen 4: 4: 4: Calibration Calibration Calibration
Use this screen to calibrate your meter and
to view or set your meter k-factor. See
Calibrate the Meter, page 55 , for procedure.
Key Key
Key
Enter the screen to set or change
preferences.
Press to activate a field for editing or
to accept the highlighted selection on a
menu.
Move to the right when editing number
fields. Press again to accept the entry
when all digits are correct.
Start the calibration.
Stop the calibration.
Displays the volume measured by the
system for the calibration test.
Enter the actual volume dispensed into
the cylinder for the calibration test.
Displays the meter k-factor. User can
set the k-factor manually. The system
automatically updates to the correct
k-factor when the meter is calibrated.
Flow Rate Units – Select from the
following options:
– Select if system has no
flow meter
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
3A6948A 45