background image

Instructions – Parts List

GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441

Copyright 1987, Graco Inc. is registered to I.S. EN ISO 9001

2:1 RATIO

Standard Pumps

240 psi (1.7 MPa, 16.8 bar) Maximum Fluid Working Pressure
120 psi (0.8 MPa, 8.4 bar) Maximum Air Input Pressure

55 gallon (200 liter) Drum Size, with UHMWPE Packings

Model 218556, Series C

With Model 218554 Stainless Steel Displacement Pump

15 gallon (57 liter) Drum Size, with UHMWPE Packings

Model 223777

With Model 223775 Stainless Steel Displacement Pump

U.S. Patent No. 4,681,516
France Brevet No. 86–07085
Other U.S. and Foreign Patents Pending

307679N

Read warnings and instructions.

See page 2 for 

Table of Contents.

WARNING

Reactive Chemical Hazard

Graco, Inc. does not manufacture or supply any of
the reactive chemicals that may be used in this
equipment and is not responsible for their effects.
Because of the vast number of chemicals that
could be used and their varying chemical reac-
tions, before using this equipment, the buyer and
user should determine all facts relating to the ma-
terials used, including any potential hazards in-
volved. Particular inquiry and investigation should
be made into potential dangers relating to toxic
fumes, fired, explosions, reaction times, and expo-
sure of human beings to the individual components
or their resultant mixtures. Graco assumes no re-
sponsibility for loss, damage, expense, or claims
for bodily injury or property damage, direct or con-
sequential, arising from the use of such chemical
components.

TI1920A

TI1920A

Parts

Содержание 218556, Series C



























Отзывы: