11
Step 14: Sewing Machine Placement
Parts Needed:
1- Sewing Machine (Your Sewing Machine)
4- Sewing Machine Clamp
1- Table Assembly – Complete with Carriage
14-1: Place your Sewing Machine onto the Top Plate of the
Carriage, and center it, both from side to side, as well as
from front to back. As shown in Fig (14-2)
14-2: Pull the Sewing Machine Clamp Handle in the Open
Position as shown in Fig(14-1); slide it into the slot as shown
in Fig(13-2), Push the handle down to the lock the Clamp
into position when it touches the Sewing Machine.
14-3: Roll the Carriage all the way to one end of the Table.
14-4: Now, put the Take-Up Rail through the open area of the
throat of your Sewing Machine. Attach the Take-Up Rail as
previously shown in the Step 9.
Step 15: Leveling the Table
Now that you have completed the assembly of your Quilting
Frame, adjust the Table so that it is Level.
15-1: Adjust the Leveling Feet by screwing them in further to
lower the table or unscrewing them to raise the table. The
Carriage should not roll from side to side, or from front to back
when it is left at any point on the table.
Congratulations! This completes your Quilting Frame Setup.
Please make sure that all screws are completely tightened before
continuing.
Now you need to install your quilt fabric to the Quilting Frame.
Detailed instructions explaining how to put your fabric onto the
frame are located on Pg.13
Fig (13-1)
Fig (14-1)
Fig (14-2)
Push Down
Open
Position
Lock
Position
Step 13: Top Plate Placement
Parts Needed:
1- Bottom Plate Assembly
1- Table Assembly - Complete with Bottom Plate
13-1: Place the Top Plate Assembly onto the Bottom Plate, as
shown in Fig (13-1). Make sure all four (4) wheels are on the
track, located on the top side of the Bottom Plate, and that
the Top Plate rolls smoothly.
NOTE:
The Completely assembled Top Plate, with the
Bottom Plate will be referred to as the Carriage thought-out
the remaining text, except when the instructions refer to
features only on one item or the other.
