5
6 Back Panel Controls and Features
PUSH
1
2
3
4
9
5
6
7
8
10
12
11
14
13
15
16
17
18
1. Universal 100-240VAC power supply input module
2. DI Ground lift switch
3. CH1 DI output
4. CH1 DI output source select
5. CH1 DI output line / mic level select
6. CH2 DI output
7. CH2 DI output source select
8. CH2 DI output line / mic level select
9. Tuner Output
10. Amp Output
11. Effects Return
12. Effects Send
13. Amp Source Select switch
14. CH1 input mic / line switch
15. CH1 mic input
16. CH2 line input
17. CH1 line input
18. CH1 & 2 input impedance select
7 Side Panel Controls and Features
48V
ch2
ch1
6
1
5
4
3
2
1
7
3 4 5
6
2
8
1. Dip Switch location diagram
2. ‘Boot Bumper’ 48V switch protector
3. CH1 48V phantom power
4. CH1 phase reverse
5. CH2 phase reverse
6. DIP switch controls
7. 1/8 mini headphone jack
8. CH2 variable phase control
8 Connections
8.1 1/4” INSTRUMENT INPUTS, CH1 & CH2
INPUT 1 - This input is for connecting any instrument pickup,
electret mic or line source to CH1. The connector is a standard
TRS 1/4” jack wired tip signal, sleeve ground. The ring is used
only for 12V power if needed. If you are using this input,
remember to select the ‘line’ setting of the adjacent ‘mic/line’
switch. We recommend muting Felix 2 before changing the
setting of the mic/line switch to avoid pops on the output.
INPUT 2 - This input is for connecting any instrument pickup,
electret mic, or line source to CH2. This input can also
accommodate two different signals from a dual source pickup
system on one TRS 1/4” cable. The connector is a standard
