1
|
Instructions for Use
|
Secure Seal™ Imaging Spacers
APPLICATION
1.
Trim to size using a razor blade or scissors (if desired) as shown in figure 1.
Figure 1
2.
Use a forceps to remove the adhesive liner from one surface as shown in Figure 2.
Figure 2
3.
Apply the spacer, adhesive side down onto the surface of a glass slide or coverslip as shown in
Figure 3. Press gently to seal.
Figure 3
4.
Remove the other adhesive liner as shown in Figure 4.
Note: To increase chamber depth, add multiple spacers.
Figure 4
