
FULL MOTION FLAT PANEL TV MOUNT FOR 28-65” TELEVISIONS
User’s Guide for Model TM65 v1568-01
! x6
STEP 1
Level and Pre-drill Holes for Mount
• Use the included level to ensure the mount is correctly aligned and
square, then mark holes for drilling.
• Drill 6 holes for the mount to attach to the wall. Only drill into a solid wall,
or the wooden studs behind drywall or sheetrock.
•
For drywall and studs,
use a 5/32” drill bit.
•
For solid/concrete walls,
use a 3/8” or 10mm drill bit.
! x6
WARNINGS
•
THE TV MOUNT MUST BE FIRMLY ATTACHED TO A SOLID CONCRETE/
BRICK/WOOD WALL, OR WALL STUDS BEHIND DRYWALL.
• Tighten screws so that parts are firmly attached, but do not overtighten.
Overtightening may cause unintended damage or weakening of parts.
• Do not remove or loosen any screws until they are no longer engaged
with the mount. Doing so may cause the TV to fall.
• It is highly recommended to have this mount professionally installed.
•
Supports VESA up to 600 x 400mm.
•
This mount is designed to hold a maximum of 132 lbs (60 kg).
TOOLS
The following tools are recommended for this installation:
• Drill
• 5/32” drill bit for drywall
• 3/8” or 10mm drill bit for concrete
• Stud finder
• Phillips screwdriver
PARTS
x2
I
M6x38
x4
F
Ø8
Ø5
x4
D
H
x2
M6x20
x4
C
M5x15
B
x4
M6x15
A
x4
M8x15
M6x50
x6
K
Ø10x50
x6
J
x4
E
Ø6
x1
M
N
x2
x1
L
Level
Ø15xØ8x4.5
x4
G
x2
I
M6x38
x4
F
Ø8
Ø5
x4
D
H
x2
M6x20
x4
C
M5x15
B
x4
M6x15
A
x4
M8x15
M6x50
x6
K
Ø10x50
x6
J
x4
E
Ø6
x1
M
N
x2
x1
L
Level
Ø15xØ8x4.5
x4
G
Note: Parts A-G are used to attach
your TV to the brackets in Step 3,
but you will not need all of them. Use
the set that best fits your TV.
STEP 2
Attach Mount to Wall
•
If mounting to a solid wall,
insert the six wall anchors into the
holes drilled in Step 1, then screw
the base plate firmly to the wall
with the supplied screws.
•
If mounting to drywall/studs,
screw the base plate firmly to the
wall with the supplied screws.
•
We recommend drilling 4 holes at the top of the mounting plate,
and 2 at the bottom.
x2
I
M6x38
x4
F
Ø8
Ø5
x4
D
H
x2
M6x20
x4
C
M5x15
B
x4
M6x15
A
x4
M8x15
M6x50
x6
K
Ø10x50
x6
J
x4
E
Ø6
x1
M
N
x2
x1
L
Level
Ø15xØ8x4.5
x4
G
x2
I
M6x38
x4
F
Ø8
Ø5
x4
D
H
x2
M6x20
x4
C
M5x15
B
x4
M6x15
A
x4
M8x15
M6x50
x6
K
Ø10x50
x6
J
x4
E
Ø6
x1
M
N
x2
x1
L
Level
Ø15xØ8x4.5
x4
G
K
J
Towards Wall