Installation, Operation & Maintenance Manual
GPS-FC48
™
-AC
NOTICE: This product is to be used only as directed. Read entire manual before use. Do not use unless properly installed.
Страница 1: ...Installation Operation Maintenance Manual GPS FC48 AC NOTICE This product is to be used only as directed Read entire manual before use Do not use unless properly installed ...
Страница 2: ...PS recommends mounting the GPS FC48 AC on the blower housing on the side opposite the motor Alternate mounting locations are on the supply air duct or the return air duct after the system filter The emitter brushes should be no closer than two inches from any wiring or metal objects NOTE Use Temperature Maximum Ambient temperature in which unit shall be used 140 degree F 60 C Mechanical Installati...
Страница 3: ...ning cycle button once While cleaning is in progress press and hold the cleaning cycle button for 5 seconds The LED will start flashing Pressing the cleaning cycle button again will change the days between cleaning The number of flashes indicates the cleaning interval in days 3 flashes 3 days 5 flashes 5 days Troubleshooting 1 Unit will not power up LED not illuminated a Confirm proper voltage is ...
Страница 4: ... NC 28208 980 279 5622 2021 Global Plasma Solutions Inc To access a list of applicable patents please visit www gpspatents com ZERO OZONE EMISSIONS MEASURED OZONE EMISSIONS FROM GPS FC48 AC DURING USE PHASE DOES NOT EXCEED 0 005 PPM AS TESTED BY UL 867 UL COM ECV ...