background image

TK510 GPS Vehicle Tracker                                                                                                                    User Manual 

                                    Page 

 

18 

VI. Alarm Types   

Vibration Alarm 

In arming status, if the car is vibrated, it will send out alarm SMS. 

Power Failure Alarm 

In arming status, if the battery is cut off, it will send out alarm SMS. 

Engine ON Alarm 

In arming status, if the car

‟s engine is ON, it will send out alarm SMS and 

call the preset phone. 

Movement Alarm 

In arming status, the movement alert is enabled automatically. Once the car 

moves  away  from  the  parking  point  for  100  meters,  it  will  it  will  send  out 

alarm SMS and call the preset phone. 

Geo-Fence Alarm 

Once  the  Geo-fence  is  activated,  if  the  car  oversteps  the  boundary,  it  will 

send out alarm SMS. 

Over-speed Alarm 

If  the  car  runs  over  the  speed  limitation  continuously  for  3  minutes,  it  will 

send out alarm SMS. 

SOS Alarm 

In any condition, if the SOS button is pressed, it will trigger the SOS alarm. 

(NOTE:  the  SOS  alarm  will  only  be  sent  to  the  2nd  phone,  the 3rd  phone 

number  &  the  GPRS  tracking  center,  the  other  alarms  will  send  to  all  the 

preset phones & GPRS tracking center.)   

Anti-tamper Alarm 

If the wiring harness is disconnected at any time, it will send out this alarm. 

Crash Alarm 

If there is crash, the crash sensor will detect it and send out alarm. 

Fatigue Alarm 

If the accumulated time of engine on is over the setting, the sire will sound 

to warn the driver.   

Fuel loss Alarm 

When the engine is OFF, if the fuel level is down, it will trigger the alarm. 

 

 

Содержание TK510


























Отзывы: