GPRINTER S-4231 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 17

GPRINTER S-4231 Скачать руководство пользователя страница 9

Installation

Install the printer

1. Please put the printer on the stable surface.

2. Make sure printer power is turned off, please do not plug

the power cable when the printer power is turned on.

3. Connect serial or USB or Parallel or Ethernet cable to

printer and PC.

4. Connect power plug to power supply socket.

Be careful:

※

Please turn off the power switch the printer in the power socket,

※

Transmission interface in the picture will vary depending on your printer

purchased aircraft type, the actual transmission interface, please refer to

the corresponding product specifications

power line is inserted into the printer.

<Picture 6>

Ribbon installation

1. Press two press buttons on left and right side to open
printer top cover.

2. Put empty paper tube into ribbon take-up hub if you
buy new ribbon which one side is no contact with
paper tube. After that, install ribbon take-up hub left
side and right side onto printer.

Remark: Factory standard ribbon two sides already
fixed well on paper tube. Go ahead to step 3 instead
of step 2.

3. Press the Push button to open print head.

4. Insert black ribbon supply hub into new ribbon, then
install ribbon and supply hub from left to right side.

5. If insert factory supplied new ribbon, please refer to
step 2: install ribbon and ribbon take-up hub.
If you buy and use new ribbon, firstly you roll up the
ribbon onto the empty paper tube.

After that please adjust the big blue wheel according
to the direction of arrows to assure the ribbon touch
the take-up hub flatly and smoothly without wrinkle.

6. Close print head by pressing two arrows locations,
confirm the two sides of print head are closed
correctly to ensure you get printing in good quality.

(Pic 1)

(Pic 2)

(Pic 4)

(Pic 5)

(Pic 6)

(Pic 7)

(Pic 8)

«
...
7
8
9
10
11
...
»

Содержание S-4231


















Отзывы:

Нет отзывов