Ribbon & Paper installation diagram
Print head
Ribbon
Media guide
Platen roller
Gap/Black mark sensor
Media guide rod
Print head
LED Indicator:
*ON LINE
Cover-open button
FEED button
PAUSE button
LED indicator
Ethernet USB Serial Parallel Power port
Top cover
Paper roll
Ribbon take-up shaft
1
.
Press
two buttons in left and right side
of top cover to lift and open the cover.
2
.
Insert
the
paper
roll
into
the shaft as picture
showing, and fix the label roll in the middle.
3
.
Put paper roll into the printer.
4
.
Press the button to open print head
5
.
Pull
out
the
paper
,
use
the
paper
guide
to fix the label in correct position till the
label
pass
gap
sensor
and
rubber
roller
.
Ribbon
Installation
:
1
.
Insert the ribbon take-up shaft into
an empty roll.
2
.
Install ribbon take-up shaft and empty
roll into the printer, left side first, right
side afterwards.
3
.
Insert ribbon supply shaft into
new ribbon
4
.
Open print head by pressing the
picture showing button
5
.
Install ribbon supply shaft into the
printer, left side first, right side
afterwards.
6
.
Pull out ribbon and let it touch the
print head and roll onto the step 1
showing empty roll
7
.
Adjust the running wheel to let
the ribbon touch print head flat
8
.
Close the print head by pressing
mechanism two sides to make sure
print head is closed completely for
good quality printing
Remark
:
GP-1124T 3 in 1 interface(USB+Parallel), without external paper holder
but with paper roll and ribbon.
GP-1125T 4 in 1 interface(USB+EParallel), with external paper
holder, paper roll and ribbon.
Note:The picture showing ports is for GP-1125T.
Paper guide
Paper guide rod
Gap/Black mark sensor
Rubber roller
*If you need more information about the product, please refer to the User
’
s Manual in CD.
*The printer specification, accessory, spare parts and program are subject to change
without prior notice.
Quick Installation Guide
GP-1124T/1125T Thermal Transfer Barcode Printer
Media
Ribbon core
Ribbon rewind hub
Outward rolling media
Inward rolling media
Label paper fixing stand
Push button for thermal
print head open
Paper
Installation:
mechanism.
*ERROR
*RIBBON Status
Ribbon take-up running wheel
External paper entrance
