25
EN
DANGER – Risk of Electric Shock
■
Use and store the device only in closed rooms. Do not operate the device in rooms
with high humidity.
■
Should the main unit fall into water, cut off the power supply immediately. Do not
attempt to pull the device out of the water while it is still connected to the mains
power! Have the device checked in a specialist workshop before using it again.
■
Never touch the device or the connecting cable with wet hands when the device is
connected to the mains power.
WARNING – Danger of Fire
■
Do not use the device in rooms containing easily ignitable or explosive substances.
■
Do not operate the device in the vicinity of combustible material. Do not place any
combustible materials (e.g. cardboard, paper or plastic) on or in the device.
■
Do not connect the device along with other consumers (with a high wattage) to a mul-
tiple socket in order to prevent overloading and a possible short circuit (fi re).
■
Do not insert anything into the ventilation openings of the device and make sure that
these do not become clogged.
■
Make sure that foodstuff s containing oil and fats are not overheated. Do not place any
vessels fi lled with oil or other liquids into the device.
■
Do not cover the device during operation in order to prevent it from catching fi re.
■
In the event of a fi re: Do not extinguish with water! Smother the fl ames with a fi re
blanket or a suitable fi re extinguisher.
WARNING – Danger of Injury
■
Keep children and animals away from plastic bags and fi lms. There is a danger of
suff ocation.
■
Make sure that the connecting cable is always kept out of the reach of small children
and animals. There is a danger of strangulation.
■
Make sure that the connected connecting cable does not present a trip hazard. The
connecting cable must not hang down from the surface on which the device is placed
in order to prevent the device from being pulled down.
■
Take care when opening the door! There is a danger of scalding from hot steam.
NOTICE – Risk of Damage to Material and Property
■
The device should only be connected to a properly installed socket. The socket must
be readily accessible so that the connection to the mains can quickly be isolated. The
mains voltage must match the technical data of the device.
■
Do not use any extension cables.
■
Unwind the connecting cable fully before connecting up the device.
■
Remove the mains plug if a fault occurs during operation. Otherwise always switch off
the device fi rst before the mains plug is pulled out of the plug socket.
■
Always pull the mains plug and never the connecting cable when disconnecting the
device from the mains power. Do not pull or carry the device by the connecting cable.
■
Always check the device for damage before putting it into operation. The device
should only be used when it is undamaged, and in working order! Do not use the
