21
EN
4. Clean the main device (
7
) with a slightly damp, soft cloth and then dry it with a soft
cloth.
5. Allow everything to dry completely before the device is reassembled and / or stored
away in a dry, clean place that is out of the reach of children and animals.
Troubleshooting
If the device does not work properly,
fi
rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the steps that are listed, contact the
customer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
Possible cause
Fix
The device does not
work.
The mains plug is not in-
serted correctly in the plug
socket.
Correct the
fi
t of the mains
plug.
The plug socket is defective.
Try another plug socket.
No mains voltage is present.
Check the fuse of the mains
connection.
The rotary switch (
3
) is in
position
0.
Move the rotary switch to a
position between
1
and
6
or
hold it in the
P
position.
The device is overloaded /
has overheated. The device
is equipped with overload
and overheating protection;
the device switches off if it is
overloaded or overheats.
Switch off the device, pull the
mains plug out of the plug
socket and allow the device
to cool down for approx.
10 minutes. The device is
then ready to be used again.
The fuse in the fuse
box is triggered.
Too many devices connected
to the same circuit.
Reduce the number of
devices in the circuit.
No error can be identi
fi
ed.
Contact our customer service
department.
The device
switches itself off
automatically.
The device is overloaded /
has overheated. The device
is equipped with overload
and overheating protection;
the device switches off if it is
overloaded or overheats.
Switch off the device, pull the
mains plug out of the plug
socket and allow the device
to cool down for approx.
10 minutes. The device is
then ready to be used again.