14-Pin DMD Ribbon Cable
(Unplug from DMD and leave
other end connected to game)
Figure A
8-pin DMD Power Cable
(Unplug from the DMD and
prevent the connector from
contacting any electronics)
Carefully remove the translite from the backbox and then lower
the speaker panel to the position shown in Fig. A to gain access
to the backbox.
ALL RIGHTS RESERVED - US PATENT 8,773,452 B2 - COPYRIGHT 2021 - COLORDMD DISPLAYS LLC
Installation Instructions
for
Gottlieb
-
CHROMA LED
Be sure to turn
OFF
the power to the pinball machine before
installing the ColorDMD display.
Tools Required
:
Remove and save all of the original DMD mounting hardware.
Remove the original DMD assembly from the game and
store it in a safe place
.
1
2
3
STEP
STEP
STEP
Disconnect the DMD power and ribbon cables from the DMD
(see Fig. A).
Secure the DMD Power Cable in a position and
location that will prevent it from contacting any electronics
.
Congratulations on the purchase of a new ColorDMD display. The ColorDMD
will enhance your pinball machine by introducing
color
to the dot matrix
display graphics produced by the game.
If pinball machine has a transparent colored plastic film attached
to the wooden speaker panel, carefully remove and store it with
original DMD. If the speaker panel plastic has red translucent paint
covering the viewable DMD area, it must be removed.
5/16" Nut Driver
3/8" Nut Driver
Phillips Screwdriver
STEP
4
•
!
•
•
®
