76343/4/5 | English, Revision 05 | Date: 23.02.2022
80
Chapter 9 – Debug / Logging
9.2 Traffic Dump Configuration (Recording of Data Traffic
from the LAN or WLAN Interface)
This function allows data traffic to be recorded on the LAN and/or WLAN interface.
The files generated thereby can later be analyzed with other programs, e.g. Wire
-
shark®.
Figure 64
Debug / Logging: Traffic Dump Configuration
Table 55
Debug / Logging: Traffic Dump Configuration
Parameter
Function
Dump Wireless
This activates the recording of data packets on the WLAN side.
Monitor Dump Des
-
tination
Setting the storage location for the WLAN recordings
–
Internal Flash:
Internal flash memory (approx.
400 MByte)
–
USB:
External USB-Memory (depending on capacity of
the memory stick)
Dump Control
With
Dump Control
you can specify what happens when the
memory limit of the internal flash or the USB memory is
reached.
–
The recording is stopped
–
The oldest recording is deleted and the recording contin
-
ues with a new file.
Filesize
*)
If the recordings are stored in the USB memory, you can set
the maximum size of the file here:
–
Small = 8 MByte
–
Medium = 32 MByte (Default)
–
Large = 128 MByte
Dump LAN
This activates the recording of data packets on the LAN side.
Monitor Dump Des
-
tination
see above at Dump Wireless
Dump Control
see above at Dump Wireless
Filesize
*)
see above at Dump Wireless
*)
= (is only displayed if Monitor Dump Destination = USB
