Mounting
Revision 04 (English), Date: 26.04.2016
14
The coax cable RG 213 to the loop adaptor is connected to the generator as follows:
-
Shielding to loop start
-
Core to loop end long (see also Table 4 on page 8).
3.4
Mounting the Track Guidance Antenna HG 19534
So that the system's function is not effected it is imperative that the area left and right
of the antenna is of at least the same distance, as its height above the guide wire is
kept free of iron obstacles. Within this area there should be no large electrically con-
ductive obstacles.
It is also important to note that the proportions in this area should not change when the
vehicle is driven, this means that the antenna should not pass by any large metallic
objects when steering. The area in front and behind the antenna is not sensitive to me-
tallic objects. In order to mount the antenna the casing lid has to be removed. 4 posi-
tions for M 5 screws have been prepared.
Figure 4
Mounting Possibilities for the Track Guidance Antenna (Mounting Bracket
not included in Delivery Package)
