Gotting HG G-19334, Руководство пользователя

Страница: 23 / 33

Monitor Mode
HG G-19334-A
English, Revision 03, Date: 11.05.2017 23
3 Monitor Mode
The monitor mode is available via the serial interface. The Götting Adapter
HG 01933ZA may be used to connect the guidance antenna to a PC. Alternatively you
can use a self-made adapter (pin assignment of the serial interface: Table 3 on page
8 / interface parameters: s. 2.6 on page 21).
3.1 Switching to Monitor Mode
In order to switch to the monitor mode please follow the cycle shown below:
Figure 5
Cycle for starting the monitor mode
3.2 Terminal Program Display in Monitor Mode
Figure 6
Monitor mode (Variant OA, values exemplary)
3.2.1
Commands in Monitor Mode
(

)et Detect Level Set threshold for „Detect“.
(

)eft System

(

)enter System

Define individual offsets for each system.

(

)ight System

(

)utput CSV-Data Comma separated serial data output.
CAUTION! (

)pdate Firmware: Flash memory is deleted! New hex file has
to be sent to the antenna as a text file.
CA(

)open Menu CANopen® menu (see below).
(

)uit Quit monitor.
1 second silence on
the transmission line
towards the antenna Send 3x „+“ to the
antenna within
1 second 1 second silence on
the transmission line
towards the antenna
These values should
be approx. 0 digits
in the center of the
track in mounting
height