manualshive.com logo in svg

Gotting HG 71912-A, Руководство пользователя

Поделиться
Скачать
Gotting HG 71912-A Скачать руководство пользователя страница 42

Software

HG 71912-A

English, Revision 02, Date: 12.07.2011

42

5.2.2.5

(C)AN-Parameters

By entering 

 in the main menu the CANopen® is called up.

The third line shows the status of the CAN status register.

The line below shows the CANopen® status: CANonline changes to CANoffline, if for 
example the CAN bus plug is pulled or if a missing terminator causes the CAN con-
troller to change to the BUSOFF mode. Besides that, the CANopen® Node status 
stopped, preoperational or operational is displayed.

The intern status is always 0 in normal case.

Figure 18

Menu: C(A)N Parameters

In this menu, the following options can be chosen:

-

by pressing 

, CANopen is activated

-

: the node adress between 1..127 can be effected,

-

: the listed baudrates can be chosen, the function autobaud is not implemented

-

: PDO_1 operational mode can be chosen. With values between 1..240 the syn-

chronous, cyclical respectively with 255 the asynchronous mode can be set, The 
following submenus are only available in the asynchronous mode:

-

: the time of cycle of the PDO_1 transmission can be chosen

-

: the inhibit time of PDO_1 can be entered here. It is the shortest time 

possible between two transmissions. If the values 

 and 

 are 0, the PDO 

is not transmitted.

-

: the so-called Heartbeat time can be altered and a control message is sent. 

With t = 0 no message is sent. If a value is entered, the toggle bit of the node sta-
tus is not switched anymore (Node-Guarding function).

S:0007 D:-0008 Code: 000f0000  Read:  10  E: 8120 N:   0  Ftx[Hz]:128000

SR = 00:        NO ERROR    /      /      /      /

CAN online    : Pre-Operational / int.Status: 0000

    (C)ANopen active                                1

    (N)ode ID                         [1..127]:     4

    (B)aud Rate  [10,20,50,125,250,500,1000kB]:   250

    (T)PDO Mode                   [1..240,255]:     1

    (H)eartbeat time          [0,10..65535 ms]:   100

    (A)utostart                                     0

    (L)owbyte first                                 0

    (Q)uit Menue

Содержание HG 71912-A































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды