10
（
Figure 14: Set the color of line 1 to transparent
）
Date/time setup
Press “OK” into Date/time setting. Use “Up” and “Down” to select the correct number for year/month/day. Once
you finish setting a number, press “OK” on the monitor to the next number. Or, you can use “Left” and “Right” on
the remote to get to the one that you want.
Press “MENU” button on the remote to exit date/time setting directly. If you don’t have the remote, you have to
go through all over these settings one by one and then press OK again to exit.
（
Figure15: date/time setup
）
Save Setting
After you set everything right, you should turn off the device by pressing ON/OFF button
on the monitor
and
